Oster A6 Slim Purple Pop Heavy Duty Clipper

Directions:

Instructions: Taking Care of Your Clipper_x000D_Note: Any other maintenance not explained in this manual must be performed by an Oster Authorized Service Center._x000D_Important: Make sure clipper is turned off and unplugged from electrical outlet before removing replacing or cleaning any part._x000D_Remove Blade assembly from the clipper_x000D_Push locking button in and hold. Push blade assembly upwards to position. Blade assembly can now be removed from clipper by pulling forward and upwards._x000D_Blade Care Cleaning Lubricating-Daily_x000D_Blades should be oiled regularly to reduce heat and maintain sharpness. Before removing the blade be sure it has cooled down._x000D_With clipper in off position apply 1 or 2 drops of Oster Clipper and Blade Lube oil on the blade. Wipe excess oil with dry soft cloth. Cleaning: Clean the excess hair from your blades by using the cleaning brush._x000D_Maintenance_x000D_To clean the blades plug clipper into electrical outlet and turn on._x000D_In a shallow pan immerse blade teeth into Oster Blade Wash cleaning solution._x000D_Caution: Do not immerse the clipper_x000D_Remove blade from cleaning solution and while holding clipper blade end down wipe the blades with a dry clean cloth._x000D_If after cleaning you find that the blades still do not cut properly it is possible that a few fine pieces of hair are still trapped between the blades. If this occurs remove the blade. Without loosening the tension springs screws slide the upper blade to one side but not completely out from under the tension spring. Wipe the surface between the blades clean with dry cloth._x000D_Place a drop of oil on the mating surfaces and in the tension spring guide slot. Slide upper blade to the other side and repeat process. Slide the upper blade back into position and reassemble the clipper. With the clipper running lubricate the blades with a light coat of Oster Kool-Lube lubricant or a drop or two of Oster Premium Lubricating Oil._x000D_Sharpening Oster cutting blades are of individual hollow-ground design hardened to extend cutting life. As with any cutting tool the cutting edges will become dull after extensive use. If sharpening is necessary send blades to an Oster Authorized Service Center._x000D_