About This Item
The Oster® Golden A5® 2 Speed Dog Clipper comes with a turbo-powered motor that generates a higher strokes per minute and has more torque than the Oster® Golden A5® Single Speed Clipper. “Normal” speed is for general purpose clipping. “High” speed is for quick body shavedowns. Comes with removeable, cleanable air filters so that the 45 watt power motor stays cooler and produces a smoother, faster cutting action with a wider blade sweep. This clipper is compatible with A5® Cryogen-XTM & Elite Cryogen-XTM blades and the wider Take-Down-QuickTM wide blade series. Clippers Include Cryogen-XTM AgION® Blade with Antimicrobial – Reduces the growth of bacteria, mold and mildew.
Features:
· Powerful Universal motor
· Insulated face plate for cool…
- Features
- hair-removal-and-shaving-products
- Brand
- Oster
- Animal Type
- Dog
- Assembled Product Dimensions (L x W x H)
- 10.50 x 6.00 x 3.00 Inches
Warning:
proposition 65 reasons:titanium dioxide, other chemicals
Directions:
Instructions: Do not tamper with clipper_x000D_Operate on voltage specified on clipper_x000D_Do not use this clipper until you have read these operating instructions_x000D_Operating the Unit_x000D_Always apply on to two drops of the provided blade lubricant or other Oster approved lubricants to the blades before use._x000D_Cutting efficiency may drop and the blades and motor may be damaged if hair is dirty or hair styling agents have been applied. Always ensure that hair is clean before using the clipper._x000D_1. Turn the clipper on using the On-Off switch located on the top of the unit and use the clipper._x000D_2. Turn the clipper off when finished using._x000D_3. Cover the blades with the provided blade guard to protect the blades._x000D_4. Unplug unit after use and store properly._x000D_User Maintenance Instructions._x000D_1. The product is for commercial use._x000D_2. Keep cord straight while clipping. If cord becomes kinked or tangled stop clipping and straighten it._x000D_3. Do not wrap cord around the clipper when storing. This can damage the cord insulation._x000D_4. Always take care not to tangle the cord while using or storing the clipper._x000D_5. We recommended storing the clipper and cord in the original carton when not in use._x000D_Greasing _x000D_Over-greasing can cause leakage and reduce the operating efficiency of the clipper. Check once a month by removing metal nameplate. Then remove nylon lever metal link and gear. Insert grease tube nozzle into hole on top of gear post. (Note: If grease does not come through clean holes). Do not fill cavity with grease. Now replace link & gear and add very little grease to teeth of gear and linkage. Use only Oster Electric clipper grease. This grease is required in double insulated clippers because of its insulative properties. Caution: Add very little grease and only when necessary._x000D_Carbon Brushes_x000D_Brushes must be inspected and replaced periodically to insure maximum motor performance and life expectancy. Unplug the clipper for the power outlet to prevent and electric shock when inspecting or replacing brushes. To remove a brush on models with a slotted brush cap unscrew the cap (a dime is an excellent tool for this) and remove nylon insulator cap. Remove the brass cap by applying slight pressure to the side of the cap with a fingernail in a picking fashion. Remove the brush and spring assembly and compare the length of the round and square sections of the brush. When the square section has been reduced to the length of the round section the brush must be replaced to prevent possible damage to the motor armature. Always replace the brushes as a set of 2 brushes even though only one may be at or below the required length. When reinstalling the brush spring-pressing down to seat the brass cap into the brush tube. Replace the slotted out cap and screw down tightly to prevent loosening._x000D_Use Oster Brushes_x000D_Avoid substitutes. Brushes used in electric motors are carefully selected for size and grade to obtain maximum trouble free performance. When ordering carbon brushes specify model number and voltage of clipper._x000D_Blade sharpening_x000D_Oster cutting blades are if individual hollow-ground design hardened to extend cutting life. As with any cutting instrument the cutting edges will become dull with usage. Increasing blade tension to force dull blades to cut can cause the clipper to heat and reduce motor life and further shorten blade life. When the cutting blades no longer cut smooth and clean sharpening is necessary._x000D_When sharpening blades becomes necessary send blades to an Authorized Service Center where approved methods equipment and proper knowledge are used to restore the original hollow-ground design and best cutting ability. Sharpening blades by flat grinding or any method contrary to the design and construction of Oster cutting blades is not recommended
Specifications
| Count |
0
|
| Price Per Unit UOM |
Each
|
| Multipack Quantity |
1
|
| ISBN-13 |
0034264416949
|
| Model |
194514
|
| Brand |
Oster
|
| Height |
3″
|
| PPU Quantity of Units |
1 Each
|
| Pet Type |
Dog
|
| Recommended Use |
Hair
|
| Length |
10.5″
|
| Count Per Pack |
1
|
| Product Name |
Oster Golden A5 2 Speed Clipper W 10 BLADE
|
| Product Line |
Golden A5
|
| Units Per Consumer Unit |
1
|
| Size |
2700 SPM
|
| Color |
Multicolor
|
| Width |
3″
|
| Power Type |
AC Supply
|
| Animal Type |
Other
|
| Category |
Pet Grooming Aids
|
| Features |
hair-removal-and-shaving-products
|
| Assembled Product Weight |
2.07 lbs
|
| Assembled Product Dimensions (L x W x H) |
10.50 x 6.00 x 3.00 Inches
|
Related products
Cats Supplies
